Smart Dig Wand: Efficient Hydrovac Operations

Designed for Operators of
Handheld Hydro Excavation Equipment

Aarcomm’s Smart Dig Wand detects unsafe motion and turns off water to reduce operator injury and protect property.

REDUCE WORKPLACE INJURY INCIDENTS

The Smart Dig Wand can protect operators by detecting drops or loss of control. Motion sensors automatically shut off the water pump when danger is detected.

HANDS FREE OPERATION

No need to stop working to rest your tired trigger finger. The Smart Dig Wand enables an operator to focus on the job rather than holding the water flow control.

EASY TO INSTALL ADD-ON SYSTEM FOR HYDROVACS

Plug-n-play system with no wiring changes required. Have your new system up and running in less than 5 minutes.

Documents

Videos

How to match the Smart Dig Wand with a receiver:

Accessories

Dual Charging Cradle 2 wire option

Part Number: PAT-87000-00

The Dual Charging Cradle with two wire option provides wireless charging to the H106 Smart Dig Wand and the H212 Trident handheld.

Part Number: PAT-87000-03

This part number is the Dual Charging Cradle with two wire option plus the PST-00010-00 USB cable kit.

900 MHz 6' Antenna Kit

Part Number: PHK-00003-00

The antenna kit includes an antenna, a 6 foot coaxial cable, and an L mounting bracket. The standard coaxial cable lengths are 6 foot, 9 foot, and 12 foot. We can also provide custom lengths upon request.

USB-C Cable Kit

Part Number: PST-00010-00

The USB-C Cable Kit provides alternative ways to power the Dual Charging Cradle, H106 Smart Dig Wand, and H212 Trident handheld. It includes a USB-C cable, USB mini cable and automotive plug.

Dual Charging Cradle 4 wire option

Part Number: PAT-87000-02

The Dual Charging Cradle with 4 wire option provides wireless charging to the H106 Smart Dig Wand and the H212 Trident handheld. The extra two wires add the ability to provide an alarm for loss prevention.

Part Number: PAT-87000-04

This part number is the Dual Charging Cradle with 4 wire option plus the PST-00010-00 USB cable kit.

2.4 GHz 6' Antenna Kit

Part Number: PHK-00005-00

The antenna kit includes an antenna, a 6 foot coaxial cable, and an L mounting bracket. The standard coaxial cable lengths are 6 foot, 9 foot, and 12 foot. We can also provide custom lengths upon request.

Bracket with Pipe

Part Number: PHK-88002-00

The Smart Dig Wand snaps into the bracket, which is then mounted between the ball valve and the dig wand pipe. The bracket helps to keep the Smart Dig Wand in place during operation, or from losing the system while also providing an opportunity for operators to control the water pump without having to use their trigger finger at the same time.

Our partners at Summit Truck Equipment produced this informational video on the Smart Dig Wand